Steren COM-817 Guía Rápida página 25

2.3. Hardware Installation Procedures
To set up the COM-817 Repeater please refer to the following picture:
Attach one end of an Ethernet cable to your computer's Ethernet port, and
the other end to one of the LAN ports of your router.
Connect another Ethernet cable from your Cable/DSL modem to the WAN
port of your router.
Connect the single DC output connector of the power adapter to the power
jack on the back of the router and plug the Power Adapter into an AC outlet.
8 8
1 2 3 4 WAN WLAN SYS
POWER WPS