Taurus Alpatec LANDSCAPES Manual De Instrucciones página 9

CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- Do not wash the filter.
- Do not use a vacuum cleaner to clean the filter.
- Sterilize the filter under sunlight regulary.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
SUPPLIES
- Supplies can be acquired from distributors and
authorised establishments (such as filters, etc.)
for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- Only the following type of supplies must be
used with the appliance.
- Filters
SPECIFICATIONS:
- Protection degree: IPX0
- Applied part type: BF
- Weight: 4,7kg
- Acoustic pressure level < 43dB(A)
- Operating temperature: 0°C~35°C
- Storage temperature: -15°C~45°C
- Continuous operation with short-time loading
- Not suitable for use in presence of flammable
anaesthetic mixture with air or with Oxygen or
nitrous oxide
- NB: These specifications are subject to change
without notice of purpose of improvement.
- NB: By virtue of the conditions of fabrication
of this product, the maximum absorbed power
can differ from that specified.
- NB: By virtue of the conditions of fabrication
of this product, the maximum used power can
differ from that specified.