Publicidad
Idiomas disponibles
Idiomas disponibles
16. Connect 2 brown wires to ON/OFF switch.
17. Connect white ground wire attached to cabinet to right post on
electronic ignitor. Remove wire tie. Connect black ignitor wire to
left post on electronic ignitor.
18. Connect regulator to gas cylinder.
19. Remove 4 screws holding lightpost panel into place.
20. Check for leaks. See Checking for Leaks in your owner's manual.
21. Gas cylinder will sit inside of cabinet assembly.
22. Reattach lightpost panel to assembly with 4 screws removed in
step 19.
DESA Heating, LLC
2701 Industrial Drive
Bowling Green, KY 42101
1-866-672-6040
www.desatech.com
123222-01
Rev. A
02/08
Publicidad
