Tabla de contenido
Publicidad
8
TCX series
11.
13.
¼" TS
14.
15.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
12.
MUSIC Group
KLARK TEKNIK, LAB.GRUPPEN,
LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC-HELICON,
BEHRINGER, BUGERA, DDA
TC APPLIED TECHNOLOGIES
MUSIC Group IP Ltd.
© MUSIC Group IP Ltd.
2015
music-group.com/warranty
16.
17.
2000
Getting Started
Models covered by this Quick Start Guide
MIDAS,
TCX82-R / TCX82-R-WH, TCX102-R / TCX102-R-WH, TCX122-R / TCX122-R-WH, TCX152-R / TCX152-R-WH,
TCX115B-R / TCX115B-R-WH, TCX118B-R / TCX118B-R-WH
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further
information about this or any other product, please visit our website at turbosound.com.
System Requirements
TCX series two-way loudspeakers operate as passive systems and require only one amplifi er channel for
correct operation; the internal passive crossover network built into each enclosure splits the frequency
range appropriately between the LF driver and the HF driver. TCX weather-resistant loudspeakers are
equipped with a 2 metre 2-core cable tail for connection to your chosen cabling infrastructure. To avoid
wasting amplifi er power you should use heavy-duty speaker cable with a minimum wire size of 12 gauge
(1.5 mm
2
), and preferably 10 gauge (2.5 mm
cable impedance and resistive losses. Always observe the correct polarity. Connect the brown wire to the
positive amplifi er output (+ve) and the blue wire to the negative amplifi er output (-ve).
Amplifi er Considerations
TCX series loudspeaker enclosures should be driven by high quality power amplifi ers designed for true
professional use. Power amplifi ers should be capable of delivering long term broadband power equal
to half the loudspeaker's peak power rating at its stated nominal impedance. The use of under powered
amplifi ers must be avoided as heavily clipped signals can cause permanent loudspeaker damage.
System Controllers
TCX systems can be used with TURBOSOUND LMS-D24 or LMS-D26 controllers to provide improved
performance as well as vital operating and system security features. If you do not have a controller,
please contact your TURBOSOUND dealer for further details. TURBOSOUND LMS-D2X controllers provide
preset slots into which you can load TCX loudspeaker model parameters, available as a free download.
To use your TCX loudspeaker with a TURBOSOUND controller:
1. Download and install the TCX loudspeaker presets from the TURBOSOUND website turbosound.com.
2. Power up the controller(s) and associated power amplifi ers.
3. Press RECALL to select the appropriate program from the preset menu using the 'A' ROTARY ENCODER.
4. Press RECALL again to accept the preset. The controller will un-mute and is then ready for use.
Quick Start Guide
2
) for longer runs. For extreme cable lengths be aware of
9
Publicidad
Tabla de contenido
