Tabla de contenido
Publicidad
Checking Batteries
On the digital keypad, press the "B"
button.
• If the red LED light flashes, change the
batteries within 2 months.
• If no LED lights, change the batteries
immediately.
Changing Batteries
Changing batteries will not erase your
personal code.
1. Open the safe door using your personal
code and locate the battery compartment
on the lower inside portion of the door.
2. Push in on the left side of the cover and
remove by sliding to the right (Fig. 6)
3. Carefully replace the batteries (4 -"AA")
using the positioning guide printed on the
inside of the battery compartment.
4. Replace the cover by sliding back into
position.
English
Appropriate Use of
Your Safe
• Your Anti-Theft safe is designed to
provide protection against theft and
minimal fire damage. It does not
protect the contents from serious fire
or water damage.
• For information on safes that provide
protection from fire and water
damage, see your Home Security
retailer or visit our website at
www.honeywellsafes.com
Troubleshooting
• Safe will not open with your
personal code:
Open the safe using the override key
and re-program your code.
• No LED Lights:
Remove the override lock cover and
open safe with the override key. Refer
to checking/changing batteries.
If you continue to experience problems
or have questions regarding your safe,
please contact Sisco customer service
at 800-223-8566. Do not return safe
to the retailer unless instructed to do so
by Customer Service Representative.
Thank you!
4
Publicidad
Tabla de contenido
