IN CASE OF BREAKDOWN
In case the case of a problem, ensure that:
The electric plug is correctly inserted and powered by the electric current (with the
1.
fuse intact), which can be checked by plugging another appliance in and switching on.
The oven door is closed correctly.
2.
The oven is not too hot. In this case, wait for it to cool down.
3.
Nothing is stopping the turntable from rotating.
4.
CLEANING
• Always ensure that your oven is has stopped fully before cleaning by unplugging
from the mains power.
• It is recommended that you clean the microwave regularly and remove any
food deposits. Failure to keep the appliance clean may lead to permanent
deterioration of the surface, reducing the useful life of the appliance and
potentially leading to hazardous situations.
• Splashes on the inside of the door, as well as on the door seals and adjacent parts
must be cleaned daily with warm soapy water.
• In the event that the seals or adjacent parts have deteriorated, the oven must not
be used until these have been restored by a qualified After-Sales service.
• Never pour water into the oven.
• Do not put water into the air vents on the top, sides of back of the appliance.
• Always ensure that your oven is has stopped fully before cleaning by unplugging
from the mains power.
• Keep the oven's internal cavity clean and dry by cleaning it regularly with a soft
cloth. Do not use abrasive materials as you risk scratching or damaging the paint.
• Rinse and dry with care. It is best to clean the metal parts of the door using a
damp cloth. Do not use a brush, sponge scourer or abrasive cloth, or any other
liquid that may damage the turntables drive motor.
• The exterior of the oven is metal. Clean it using a cloth dampened with warm
soapy water. Rinse and dry with a soft cloth.
English
GB-13