Controls - GE APFD05 Manual Del Propietario Y Instrucciones De Instalación

Controls

Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
4
NOTE: When the machine is powered on for the first
time, the buzzer will play power-on music, and then the
machine will go into standby status.
1. Power Button
Turn ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the Power
button does NOT disconnect the appliance from
power supply.
Press the Power button. The Power indicator will
illuminate.
2. Mode Button
Press the Mode button to toggle among the operating
options. The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
Dry – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling
3. + and – Buttons
Press the two keys to change the Temperature or
Time.
To Set the Temperature:
Press the + or – button to select the required
temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or Dry mode.
To Set the Time:
Press the + or – button to select the required time.
4
2
3
4. Fan Speed Button
In cooling or fan mode, press the Fan button to select
high or low fan speed.
NOTE: The fan speed cannot be adjusted when the
unit is in Dry mode.
5. Timer Button
Press the Timer button, when the Timer symbol
flashes, press the + or – button to select the time.
Program a time from (1 hour to 24 hours) for the air
conditioner to turn Off or On.
NOTE: When the inner unit chassis is full of water,
the Water Full light will turn on, a buzzer will sound for
several seconds and the compressor will stop.
Refer to the instructions on page 5 for draining the water from
the unit.
1
5
49-5000526 Rev. 1