Power-Cord Caution - Onix M-35 Guia Del Usuario

Thank you for purchasing ONIX Electronics. With sincere appreciation, we suggest that you should read this User's
Manual thoroughly before operation and keep the Manual properly for further reference. .
INSTALLATION
I n s t a l l t h e u n i t i n a we l l ve nt i l ate d p l a ce a n d n o t
exposed to high temperatures or humidity, nor any heat
sources such as heaters or radiators. Be sure to leave
space around the unit for ventilation to improve heat
radiation (at least 30 cm at top, 10 cm at rear, and 20 cm
at each side). If not enough space is provided between the
unit and walls or other equipment, heat will build up inside, interfering with performance or causing malfunctions.
CONNECTIONS
Before making or changing the connections, switch o
the power in order to prevent damaging the product.
Connect the white plug 3 to the L (left) channel 1,
and the red plug 4 to the R (right) channel 2.
Be sure to push the plugs securely.
MAINTENANCE OF EXTERNAL SURFACES
Remove dust and dirt with a clean, dry cloth. Never use solvents, gasoline, insecticide sprays and other chemicals on
or near the equipment because they can corrode the surfaces.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short circuit or electric shock.
M -35
NETWORK PLAYER
1. USB interface
2. Remote control receiving window
3. Multifunction display window
4. Lock indicator *
* when the indicator is on, the input signal is in "lock" state.
** when the indicator is on, it is in "up-sampling" state.
The M-35 is equipped with lters for the suppression of radio interference in accordance with EEC regulation
2
USER'S GUIDE
USB
5. Up-sampling indicator **
6. Leftward selection key
7. Downward selection key
8. Play/OK key
CONNECTING THE PIN-RCA CORDS
1 Left channel
L
3
White plug
LOCK
SRC
2
Right
R
channel
4
Red plug
POWER
ON OFF
9. Rightward selection key
10. Upward selection key
11. Power switch