Assembly And Installation - Reese M5 MY20 GM LEG Instrucciones De Producto

FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
1. The M5 MY20 GM Leg comes pre-assembled, adjusted, and ready to install.
6
Determine which center section mounting holes to use to ensure a minimum of 6" clearance between the truck bed rail and
2.
the bottom of the trailer. ( For more detail, please refer to the GUIDELINES FOR MATCHING HITCH, TRUCK, AND
TRAILER section located in the head and center section instruction sheet.) Legs should be attached at same height on
both sides of unit. This unit has 4" of vertical adjustment.
3. Using the (4) M16x2x40 mm Hex Head Bolts, attach the legs to the center section structure, threading the bolts from the
inside of the center section into the threaded portion of the legs. Finger tighten bolts initially until final adjustments are
made.
©
2020 Horizon Global America Inc.
Product Instructions

ASSEMBLY AND INSTALLATION

8
7
M5 MY20 GM LEG
Page 2 of 21
5
30937N 05/08/2020
Part Number:
30937
Rev. A