5.-6
Do not install the equipment inside the sauna or any wet area.
Because it may cause rusty.
Care and Maintenance
1. This equipment must be assembled and checked by an adult.
2. Regularly check all nuts and bolts for tightness before use and replace any worn,
defective or missing parts. DO NOT try to repaire broken parts.
3. Regularly check swing seat, ropes, glider, steel tube, ground anchor and other parts
are tightened completely and replace worn & damaged parts when necessary.
If these checks are not carried out, this equipment could overturn or otherwise
become a hazard.
4. Remove wore and damage parts from use when necessary until replacement
parts are fitted.
5. Replace defective parts in accordance with the manufacturer's instructions.
6. At the beginning of each season, please oil all metallic move parts to maintain
and regularly oil when necessary during the usage season.
7. Swing and Glider set placement:
(a)
Place this equipment on a level surface at least 2 meters from any structure
or obstruction. Such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
(b)
DO not install this equipment over concrete, asphalt or any other hard surface.
(c)
Place this equipment on a well-lighted area.
(d)
Do not use indoor.
8. Weather condition:
(a)
Glider seat, footrest and swing seat should be kept dry--do not use when
these parts are wet.
(b)
Wind or air movement shall be calm and gentle.
(c)
Please do not use when face sun directly to affect visibility or change
orientation to leave sun behind.
9. This item is not designed for adults or combined weight of 5 children not to
exceed a maximumweight of 175kgs. (35 kgs for each element)
10. Please keep these instruction in a safe place for future reference.
11. To keep clean of this equipment.
Page 11 of 51