Replacing The Battery; Technical Specifications; Intellectual Property - Suunto Bike Pod Manual De Instrucciones

2. In the Speed/Distance menu, select Calibrate.
3. Select Bike POD.
4. Select Cal.
5. Set the correct calibration factor with UP/DOWN.

3.5. REPLACING THE BATTERY

The average battery life is approximately 300 hours. When
your Bike Pod does not work properly any more, you may
need to change the battery.
1. Open the battery compartment cover with a coin.
2. Remove the old battery.
3. Place the new battery into the battery compartment with the positive side
facing up and close the cover.
NOTE:
Replace the battery with extreme care to ensure that your Bike Pod
remains water-resistant. Careless battery replacement may void warranty.
NOTE: To reduce the risk of fire or burns, do not crush, puncture or dispose of
used batteries in fire or water. Only replace them with manufacturer-specified
batteries. Recycle or dispose of used batteries properly.
NOTE: Suunto recommends that the battery cover and the O ring are changed
simultaneously with the battery to ensure that your Bike Pod remains water
resistant. Replacement covers are available with replacement batteries.
4. SUUNTO TRAINING MANAGER (STM)
Your Suunto Bike Pod also adds new features to the Suunto Training Manager.
To be able to use these features, you must update your STM software using the
mini-CD supplied with the Suunto Bike Pod package.
You can also download the latest version of the Suunto Training Manager from
www.suunto.com.
4.1. UPDATING YOUR SUUNTO TRAINING MANAGER
To update Suunto Training Manager:
1. Insert the Suunto Training Manager mini-CD into the drive.
2. Wait for the installation to begin and follow the instructions.
NOTE:
If the installation does not automatically start, click Start --> Run and
type D:\setup.exe.
4.2. NEW FEATURES
New features include a speed graph that you can use to view the development
of your cycling speed, and a possibility to view all the graphs in relation to dis-
tance instead of time.
NOTE:
For more information on the new features, see the Suunto Training
Manager help.

5. TECHNICAL SPECIFICATIONS

• Weight: 19g (including battery and spoke magnet)
• Water-resistance: 30 m / 100 ft. (ISO 2281)
• Operating temperature: -20°C to +60°C / -5°F to +140°F
• User replaceable battery: 3V
• Transmission range: up to 10 m / 30 ft.
• Accuracy: When calibrated, typically better than 1%
• Frequency: 2.465 GHz ANT compatible
• Battery life: 300 h (at 20°C / 68°F)

6. INTELLECTUAL PROPERTY

6.1. COPYRIGHT
This publication and its contents are proprietary to Suunto Oy and are intended solely
for the use of its clients to obtain knowledge and information regarding the operation
of Suunto products.
Its contents shall not be used or distributed for any other purpose and/or otherwise com-
municated, disclosed or reproduced without the prior written consent of Suunto Oy.
6
CR2032