Steren 920-010 Manual Del Usuario

Before using your new Power Surge Protector, please read this instruction Before using your new Power Surge Protector, please read this instruction
manual to prevent any damage. Put it away in a safe place for future manual to prevent any damage. Put it away in a safe place for future
references. references.
• Do not use or store the equipment near wet places.
• Clean only with a soft, dry cloth.
• Protection against power failures
• Protection against voltage peaks
• Three-minutes reestablishing
• Ease installation
• Compact size
3
2
1
1.- Grounded outlet
Allows you to connect devices to protect
2.- Over / Under voltage indicator
It turns on when the protector detected a very high or very low voltage which can
damage the devices
3.- Security indicator
It lights on when you connect the protector to an outlet or when the voltage
returns to normality.
4.- Power on indictor
Will turns on after you connect the protector to an outlet (around 3 minutes) or
when the voltage returns to normality.
5.- Grounded plug
Allows you to connect the protector to an outlet. If it is necessary, you can detach
the grounded knife.
IMPORTANT
FEATURES
CONTROLS
4
5
1.- Connect the protector to an outlet. If it is necessary, detach the grounded
knife. Now the yellow LED will light up.
2.- Connect the device you want to protect, make sure about the power output, it
shouldn't exceed more than 3600W.
3.- Now the protector won't deliver any voltage for 3 minutes.
4.- After the 3 minutes, the Power On LED will light up and the device will be
protected.
5.- If a very low / very high voltage appears suddenly, the surge protector will
switch off and the Power Off LED will light up.
6.- When the voltage returns to normality, the red LED will light off and the
protector will enter in hold on mode for 3 minutes, after this time, the protector
will deliver energy and a green LED will light up.
SPECIFICATIONS
Input: 90-130V~
Output: 117V~
Operating temperature: -5 to +55 º C
RH: maximum 80 %
Disconnection time alter
an electric failure: 2 ms
Charging reconnection time: 3 minutes
Product design and specifi cations are subject to change, without notice. Product design and specifi cations are subject to change, without notice.
This Steren product is warranted under normal usage against defects in workmanship and materials to the
original purchaser for one year from the date of purchase.
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package,
and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accesories to costumer, as well as warranty service, at
any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow
enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call Center.
Call Center
01 800 500 9000
INSTRUCTIONS
60Hz 30A
60Hz 3600W
Product: Power Surge Protector
Part number: 920-010
Brand: Steren
WARRANTY
CONDITIONS