Steren VGA-250 Manual De Instrucciones página 42

Standard Mode Synchronization
NOTE: Make sure you have placed batteries
in the Remote.
1. Press the Power button on the Wii console
to turn it on.
2. Remove the battery cover on the back of
the remote. Press and release the SYNC.
button inside the cover. The Player LEDs
will blink.
3. Open the SD Card Slot cover on the front
of the console. Press and release the SYNC.
button on the inside of the compartment
4. When the Player LED blinking stops,
connection is complete. The LED that is
illuminated indicates the player number.
42