Maxon 263260-12 Manual De Instrucciones página 4

LIFT CORPORATION Sht. 4 of 22 DSG#
Remove all rings, watches and jewelry before doing any electrical work.
Never route an energized wire. Make sure battery is disconnected. Always
route electrical wires clear of moving parts, brake lines, sharp edges and
exhaust systems. Avoid making sharp bends in wiring. Attach securely. If
drilling is necessary, first check behind the drilling surface so you do not
damage any fuel lines, vent lines, brake lines or wires.
1. Disconnect power from Liftgate.
Remove nut from negative (-) battery
terminal (FIG. 4-1). Disconnect nega-
tive (-) battery cable (FIG. 4-1).
© MAXON Lift Corp. 2017
WARNING
!
WARNING
!
POSITIVE (+)
BATTERY CABLE
NUT
NEGATIVE (-)
BATTERY CABLE
DISCONNECTING (-) BATTERY CABLE
M-15-16
Rev A Date: 06/19/17
NUT
POSITIVE (+)
BATTERY TERMINAL
NEGATIVE (-)
BATTERY TERMINAL
FIG. 4-1