The Remote Control - Avermedia AVerTV Hybrid STB 1080i Manual De Usuario

AVerTV Hybrid STB 1080i

3.2 The Remote Control

The diagram below shows the remote control unit layout.
8. AV/PC
9. PC BGM/ Res.
10. SLEEP
11. PICTURE
12. INFO
13. SOURCE
14. MUTE
15. PREVIEW
16. CH▲/▼
17. EPG
18. TXT
19. PIP Pos.
20. PIP
21. AUDIO MODE
22. SUBTITLE
23. TV/RADIO
1. POWER
2. Numberic Buttons
3. CH RTN
4. MENU
5. VOL ◄/►
6. LIST/OK
7. / EXIT
To toggle between TV/ Video or PC display
- Switch the audio source when in PC display mode
- Switch display resolution setting to 1024x768 when in TV/Video mode
To automatically turn off the unit after 30, 60, 90, 120 or 150 minutes.
To adjust brightness, contrast, color, tint, sharpness.
*The picture adjusting is not supported in S-Video/composite video output mode.
Display the current program information. (DTV only)
Switch between TV, PC or external video sources
To turn off /on the sound
- Analog TV：Display 13 consecutive TV channels on-screen
- Digital TV：Display 9 consecutive TV channels on-screen
- TV Mode：Go to next or previous program.
- OSD Menu：Function as the UP and DOWN arrow button.
- PIP Mode：Move the PIP screen by using the arrow buttons
View EPG information. (DTV only)
Press to view Teletext. (DTV only)
To move the small TV/Video screen using the CH▲, CH ▼, Vol◄, and Vol► buttons
in PIP mode. Press this button again to exit the adjusting mode.
TV Mode Go to PIP mode.
：
PIP Mode Set the PIP window size to 1/4, 1/9, 1/16 and no PIP window.
：
* To watch TV/Video in a small screen on an always on top of the PC display.
- Analog TV：Switch between different audio mode, mono, stereo, dual
language.
- Digital TV：Set audio mode and language.
- Analog TV：Switch between BG/DK for sound in Bulgaria, Czech, Poland,
Hungary and Slovakia.
- Digital TV：Enable Subtitle feature.
Toggle between live TV and Radio broadcasts. (DTV only)
ENG-6
Turn the unit on/off
To select a TV channel
Go to the previously selected channel
- TV Mode：Enter the OSD menu.
- OSD Menu：Select submenu or
save the setting.
- TV Mode：Increase / Decrease the
volume
- OSD Menu：Enter or exit the sub
menu.
- PIP Mode：Move the PIP small
screen by using the arrow buttons
- OSD Menu：In the menu, press this
button to confirm the selection.
- Digital TV：Bring up the TV
program list
- TV Mode：To temporarily freeze
the image on the screen.
the button again to unfreeze the
image.
- OSD Menu：Exit the current menu,
dialog box, setup page or OSD
menu.
- PIP Mode：Close PIP window.
Press