Assembly - HAMPTON BAY 710.193.000 BARE Guía De Uso Y Cuidado

Assembly

Attaching the support bar to the
1
arms
□ Attach the support bars (D and E) to the arms (A and B)
using M8 bolts (BB), spring washers (DD) and washers (CC).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (HH) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
plastic caps (GG) after assembly is nished.
A
E
CC
DD
BB
GG
3
Placing the cushions
□ Place the cushions (F and G) on the chair.
F
CC
DD
BB
HH
GG
D
B
G
2
Attaching the metal plates to the seat
□ Attach the metal plates (II) to the chair seat (C) using M8 bolts
(AA), spring washers (DD) and washers (CC).
□
Set the chair frame (C) on the rocker assembly with the front
of the seat facing you and the arrows on the support bar (E)
pointing towards you. This is very important for a safe,
balanced rocking motion.
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (HH) to tighten.. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
plastic caps (FF and GG) after assembly is nished.
□
□
C
5
FF
EE
DD
CC
II
AA
GG