EUROM HVF14 Instrucciones página 9

ASSEMBLY (only HVF18S)
1 = body of fan
2 = telescopic stand
3 = holder
 Place the holder (3) with telescopic stand (2) on the foot (5),
positioning one screw-hole on top of the other one.
 Insert 4 screws (6) into the double holes and tighten securely with
the 4 nuts (7). Slide the decorative cover (4) over the mounting.
 Secure the body of the fan (1) with both clamps (8) and 4 screws
(7) on the telescopic stand.
 Check that everything is secured properly.
9
4 = decorative cover
5 = foot
6 = screw
7 = nut
8 = clamp
9 = U-shaped tube