Instruction Sheet - 3B SCIENTIFIC PHYSICS 1021533 Manual De Instrucciones

3B SCIENTIFIC ® PHYSICS
Relative Pressure Sensor FW, ±1000 hPa 1021533

Instruction sheet

07/21 SD/ GH
1. Safety instructions

To avoid permanent damage to the internal
semiconductor
permitted relative pressure of 4000 hPa must
never be exceeded.
Only suitable for use with non-corrosive gases
such as air, helium or nitrogen.

Do not exceed the maximum temperature of
the measured medium of 100°C!

Do not allow the sensor element to come into
contact with water.
2. Description
Relative pressure sensor with a measurement
range up to 1000 hPa, suitable for measuring the
pressure on the piston of the transparent Stirling
engine 1002594 (for a pV diagram).
For two-port measurement using the sensor,
hose connections are provided for two inputs.
The sensor box is designed to be detected
automatically by the CMA interfaces distributed
by 3B.
sensor, the maximum
3. Equipment supplied
1 Sensor box
1 Silicone hose, internal Ø 2mm, 1mm long
1 PVC hose, internal Ø 3.5mm, 1mm long
Additionally required:
1 Sensor cable 1021514
4. Technical data
Measurement range:
Sensor type:
Accuracy:
Resolution:
Connections:
1
± 1000 hPa
Semiconductor sensor
± 1 %
± 1 hPa
2 hose connections,
4.8 mm diameter