Pitch Control - US Blaster USB 7340 El Manual Del Propietario

USB 7340
Dual Media Player with mixer
27. "-"
In the "FOLDER" mode, you can select previous folder; in the "TRACK" mode, you
can select previous track.
28. CONT / SINGLE / ROBO BUTTON
Unit1 Unit2
Single Single
Single Continuous
Continuous Continuous
ROBO ROBO
29. IN BUTTON ( LOOP SYSTEM)
This button sets the beginning of the loop. The Loop indicator on the display flashes.
30. OUT BUTTON ( LOOP SYSTEM)
When you press this button, you set the end point of the seamless loop and you start
the loop. To finish the loop, press this button again.
31. RELOOP BUTTON (LOOP SYSTEM)
This button is used to start the last saved loop.

32. PITCH CONTROL

Use this fader to increase or decrease the speed of the track.
33. PITCH BUTTON
If you push this button, the adjustement of the pitch potentiometer is available.
34. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the ori-
ginal pitch when it is released.
35. PITCH BEND - BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when
it is released.
Function description
Pressing ROBO button activates the SINGLE function,
The SINGLE function makes the unit play one song
and then stop
On unit 1, pressing the ROBO button activates the
SINGLE function; On unit 2, it keeps the
CONTINUOUS function. The SINGLE function causes
unit 1 to play one song and then stop, and the
CONTINUOUS function causes unit 2 to play
continuously.
Keeps unit 1 and unit 2 in the CONTINUOUS function,
while the first unit plays to the end and the
second unit will play continously.
Pressing the ROBO button a second time activates
the ROBO function, causing the unit to alternate
play between two units from both sides.