13.7.1. ELECTRICAL WIRING DIAGRAMS
The electrical wiring connection for the KPI unit is shown in the following figures.
Through the wiring connection hole in the cabinet, connect the cable of the remote control switch or an optional extension cable to the connectors
−
on the printed circuit board inside the electrical box.
Connect the power supply wires and the ground wire to the terminals in the electrical box.
−
Connect the wires between the KPI unit and the indoor unit to the terminals in the electrical box.
−
Controlled network system (CSNET WEB)
Indoor unit
Indoor unit
KPI + PC-P2HTE
INSTALLATION AND OPERATION MANUAL
Indoor unit
Indoor unit
27
KPI
KPI