Declaration Of Conformity; Noise/Vibration Information - Bosch PSR 2,4 V Instrucciones De Servicio

Declaration of Conformity

We declare under our sole responsibility that this product is in conformity
with the following standards or standardization documents. EN 60 745
(Battery powered products) and EN 60 335 (Battery charger) according
to the provisions of the directives 73/23/EEC, 89/336/EEC, 98/37/EC.
06
Dr. Egbert Schneider
Senior Vice President
Engineering
05.07.2006, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen

Noise/Vibration Information

Measured values determined according to EN 60 745.
Typically the A-weighted sound pressure level of the machine is less
than 70 dB (A). Measurement uncertainty K=3 dB.
The noise level when working can exceed 85 dB (A).
Wear hearing protection!
Overall vibrational values (vector sum of three directions) determined ac-
cording to EN 60 745:
Screwdriving: Vibrational emission value a
2
K=1 m/s .
WARNING
standardised test given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the ways in which a
power tool can be used and may increase above the level given in this
information sheet. This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
NOTE: To be accurate, an estimation of the level of exposure to vibration
experienced during a given period of work should also take into account
the times when the tool is switched off and when it is running but not ac-
tually doing the job. This may significantly reduce the exposure level over
the total working period.
20 • 1 609 929 H44 • 21.07.06
The vibration emission level given in this information
sheet has been measured in accordance with a
English - 6
Dr. Eckerhard Strötgen
Head of Product
Certification
=<2.5 m/s
h
2
, uncertainty