Technical Data; Safety Instructions - Mato LubeJet-eco Instrucciones De Empleo

Technical Data:

Size LxBxH:
Spraying capacity:
Air pressure min./max.: 3 – 5 bar
Air connection:
Weight:

Safety Instructions:

Non-compliance with the safety instructions can result in danger both to persons and to the
environment and the
to the loss of any claims for damages. The operator
the contents of the Operating Instructions, particularly the Safety Instructions are known to
the operating personal.
- The pressure in the air supply line is max. 5 bar.
- We advise wearing a mask and safety glasses during use.
Spraying flammable materials such as petrol, solvents and the like is prohibited.
-
- The use of the equipment near open flames is prohibited.
Never point the spray gun at people or animals! Risk of injury!!
- Before any repair or maintenance work, the compressed air connection should be removed.
- The use of accessory components e.g. hoses and connection fittings, which are not supplied by
MATO, can in some cases give rise to the risk of accidents. No liability can be accepted for
accidents or damage caused by components from other sources.
- Protect the unit from damage and the effects of heat.
- Modifications or changes to the equipment are only allowed after
- The safe operation of the equipment is guaranteed only if used in accordance with the directions.
Maintenance, inspection and repairs must only be carried out by qualified specialist personnel,
-
who have acquainted themselves with the subject by studying the operating instructions.
Maintenance:
When carrying out repair or maintenance work, the compressed air connection must be removed.
Make a regular check on the pressurised components for possible damage.
Defective parts must be replaced with genuine spares without delay.
Warranty:
If the operating instructions are complied with and the equipment used in accordance with the
directions, we accept liability within the bounds of the statutory warranty obligation.
When making warranty claims always attach the invoice from your dealer, giving the date of purchase.
Your contribution to protecting the environment:
The pertinent regulations for the registration, setting up and operation of equipment for dealing with
materials hazardous to water must always be complied with by the user. (e.g.. WHG, VawS and TRbF)
6
188x70x420 (mm)
400 cc Lube Shuttle System
G1/4"
1.5 kg
equipment. Non-compliance with the safety instructions can lead
of the equipment must ensure that
discussion with the maker.