COPPER BIRD FEEDER
OPERATOR'S MANUAL
Model MTS-CBF1
This Copper Bird Feeder is a beautiful addition to your outdoor décor. The feeder also acts as a shelter
with a luxurious copper cover. The easy-to-clean feeder is equipped with four feeding ports and the
lipped feeding tray with drain holes prevents waste and keeps feed dry.
INSTRUCTIONS FOR USE + CARE:
FILLING: To fill bird feeder with seed, remove the ring handle by turning it counter clockwise.
With the ring handle removed, lift the copper cover off of the center screw.
Fill feeder tube with seed. Do not fill beyond the black rim at the top of the feeder tube.
Replace the copper cover onto the center screw and secure with the ring handle. Refill as needed.
CLEANING: Remove all seed and disassemble feeder before cleaning. Wash regularly with warm water and let
dry completely before refilling.
If mold or debris has accumulated, mix nine parts water with one part bleach and clean thoroughly. Rinse well,
dry completely and refill with fresh seed.
COPPER CARE: To restore the brilliant finish to your copper feeder, polish well with a copper cleaner/varnish.
Seal copper with a clear lacquer to prevent additional wear.
If you have any questions or comments, please call the Snow Joe
at: 1-866-SNOWJOE (1-866-766-9563).
© 2018 by Snow Joe
, LLC
®
Distributed exclusively by Snow Joe
All rights reserved. Original instructions.
, LLC
®
Ring handle
Copper cover
Center screw
Black rim
Feeder tube
Seed tray
+ Sun Joe
®
1
Form No. SJ-MTS-CBF1-880E-M
Customer Service department
®
SAVE THESE INSTRUCTIONS