Uniteck UNICONNECT 1.6 Manual Del Usuario página 9

INSTALLATION OF THE ROOF PASS
• Drill through the wall with a hole saw. Diameter between 15 and 20 mm.
With glueing:
Clean the installation area with the degreaser, not provided (do not use alcohol or white spirit)
•
• Apply the glue to the area indicated in white in the image below (not provided), then position it
where the hole is drilled.
With drilling:
• Secure the roof pass with the 2 self-tapping screws
www.uniteck.fr
EN
X2
9/19