Rola Hull-Hugger 59914 Manual Del Usuario página 3

THE CHART BELOW IS THE IDEAL RECOMMENDED SPACING FOR THE TWO HULL-HUGGER™ SUPPPORT
ARMS, HOWEVER BOTH SUPPORT ARMS MUST BE BOLTED INTO THE STUDS OF THE WALL. BOLTING
THE PRODUCT TO DRYWALL ALONE IS NOT SUFFICIENT AND COULD RESULT IN INJURY TO PERSONS
AND/OR WATERCRAFT. USE THE CHART BELOW FOR APPROXIMATE PLACEMENT AND ADJUST SPACING
BASED ON STUD LOCATION.
​
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Hull-Hugger™ Watercraft Storage Unit | Product Code: 59914
CAUTION
Spacing Chart
Page 3 of 9
59914N Rev A 3/15