Steelcase Ology Desk to Currency Manual Del Usuario página 7

®
8.
Level case by adjusting glides.
9.
Connect wire manager to case using wire tie in kit.
IMPORTANT:
Insert wire tie through holes in case then through
connection between the first link and second.
10.
Install filler into notches on bottom
of storage top with two (2) #10 x 5/8"
pan head screws.
11.
Run worksurface up
& down to make sure
the wire manager
runs smoothly.
11
8
GLIDE
#10 x 5/8" PAN HEAD SCREW
FILLER
WIRE MANAGER
CASE
9
10
WIRE TIE
Page 7 of 27
Doc # 133317 Rev B