Cd Changer Troubleshooting - Rockford Fosgate RFX Serie Instalación Y Operación

CD C
HANGER
S
YMPTOM
ERROR 1
(Initialize Error)
ERROR 2
(Magazine Eject Error)
ERROR 3
(Loading Error)
ERROR 4
(Unloading Error)
ERROR 5
(Elevator Error)
ERROR 7
(Focus Error)
ERROR 9
(TOC Error)
NO CD
(No Disc Error)
T
ROUBLESHOOTING
D
IAGNOSIS
Disc unit can't detect
magazine
Magazine tray
load/unload problem
Magazine sensor is defec-
tive
Can't eject magazine
Magazine emitting spring
is damaged
Magazine tray is jammed
Tray loading has not com-
pleted after 5 secs
Loading mechanism and
motor (or driving circuit)
is defective
Tray unloading has not
completed after 5 secs
Unloading mechanism
and motor (or driving cir-
cuit) is defective
Magazine tray is jammed
The laser pick-up is
defective
Disc is warped, cracked,
or damaged
Disc is warped, cracked,
or severely damaged.
The laser pick-up is
defective
Magazine is empty or not
installed in the unit
– 45 –
R
EMEDY
Press the eject button and pull out the
magazine. Press the reset button
Check tray load/unload area
Have a service center check the mag-
azine sensing switch
Press the reset button
Have a service center inspect and
repair as necessary
Inspect and repair as necessary
Press Eject, pull out the magazine, and
try again. Press Reset
Repair mechanism and loading motor
(or driving circuit)
Press Eject, pullout the magazine, and
try again. Press Reset
Have a service center repair mecha-
nism and loading motor (or driving
circuit)
Repair CD changer mechanism; then
press Reset
Repair the laser pick-up
Put in a new disc
Eject damaged disc from source unit
and play only non-damaged discs
Have a service center repair the
laser pick-up
Check the magazine and insert discs