Installation Methods; Standard Installation - Rockford Fosgate RFX Serie Páginas De Referencia Para La Instalación

RFX9000

INSTALLATION METHODS

Standard Installation - Install sleeve retaining clip onto unit.
Install the mounting sleeve in the instrument panel (see chart).
Secure the backstrap to the rear of the radio (use the supplied
M5 x 6mm screws) and tighten the screw. Slide radio into the
mounting sleeve until it "clicks" into position. Replace the
factory trim panel if used.
ISO-DIN Installation - Use the supplied screws (M5 x 6mm)
to secure the factory mounting brackets into at least two holes
on each side of the radio. Install the radio factory trim panel.
WHITE
RED
BLK (GND)
BLK (GND)
WHITE
RED
FRONT (L-) SPEAKER OUTPUT
FRONT (L+) SPEAKER OUTPUT
FRONT (R-) SPEAKER OUTPUT
FRONT (R+) SPEAKER OUTPUT
REAR (L-) SPEAKER OUTPUT
REAR (L+) SPEAKER OUTPUT
REAR (R-) SPEAKER OUTPUT
REAR (R+) SPEAKER OUTPUT
POWER ANTENNA (175mA MAX)
POWER REMOTE(400mA MAX)
IGNITION (SWITCHED) (INPUT)
CHASSIS GROUND
BATTERY +12V

STANDARD INSTALLATION

LEFT SIDE VIEW
B
C
F
E E
Sleeve Retaining Clip
AF/FM ST/CD Player/IR Remote (Optional)
R
LINE OUT
A
A REAR
L
R
LINE OUT
B
FRONT
B
L
WHITE/BLACK
WHITE
GRAY/BLACK
GRAY
GREEN/BLACK
GREEN
VIOLET/BLACK
VIOLET
BLUE/RED
LT. BLUE
RED
BLACK
CHOKE & FUSE
BOX
YELLOW
TOP VIEW
G G
B C
H H
F
D D
A A
FOLD DOWN FACEPLATE
Press Button for CD Access
4-Speaker System
2-Speaker System
-
+
-
+
-
+
-
+
Tabs To Bend
Thickness of
Instrument Panel
A B C D E F G H
** *
1.20mm to 1.50mm
1.20mm to 11.3mm
* * *
2.00mm to 7.00mm
*
2.90mm to 10.4mm
* * *
5.20mm to 10.4mm
6.30mm to 8.80mm *
* *
14.0mm to 19.8mm
18.3mm to 20.8mm
RIGHT SIDE VIEW
E E
Mounting Sleeve
Specification
Reference
Sheet
ANTENNA
Antenna
should
have good
connection
to sheetmetal
Power Harness
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
(Looking into the Radio Connector)
PIN NO DESCRIPTION
1 BATTERY +12V (YELLOW)
2 CHASSIS GROUND (BLACK)
3 IGNITION +12V (RED)
4 POWER REMOTE (BLUE)
5 POWER ANTENNA (BLUE/RED)
6 NC
7 NC
8 NC
9 REAR (R+) (VIOLET)
10 REAR (R-) (VIOLET/BLACK)
11 REAR (L+) (GREEN)
12 REAR (L-) (GREEN/BLACK)
13 FRONT (R+) (GRAY)
14 FRONT (R-) (GRAY/BLACK)
15 FRONT (L+) (WHITE)
16 FRONT (L-) (WHITE/BLACK)
ISO-DIN INSTALLATION
Secure factory bracket to at least 2 holes