Polk magnifi one Guía De Configuración página 5

How to Connect Your Subwoofer
Your subwoofer receives a wireless audio signal from the bar. All you need to
do is plug in the power cord and make sure the main power switch is ON.
Syncing Bar and Wireless Subwoofer
The MagniFi One Sound Bar and wireless
subwoofer are preset at the factory to
work together. Should your wireless
subwoofer stop receiving an audio signal,
follow these instructions to re-establish the
connection:*
1. Turn off subwoofer by unplugging power cord from amplifier plate.
2. Press the SYNC button on the back of the bar and hold for
three (3) seconds.
3. The LED on the back of the bar will start flashing at a faster rate, indicating
that the bar and the subwoofer are ready to be connected.
4. Turn on the subwoofer by plugging in power cord into receptable on
amplifier plate.
*
Note: If your bar is mounted to the wall, it will need to be removed for this procedure
4