When The Appliance Is Not In Use; Something Not Working - Electrolux ENC74800 Manual De Instrucciones

When the appliance is not in use

Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to

SOMETHING NOT WORKING

Before contacting your local Service Force Centre check the following point:
Problem
" " is displayed in the
temperature display.
Audible alarm + flashing red
warning lamp. (It is too warm
inside the freezer.)
It is too warm inside the
refrigerator.
It is too cold inside the
refrigerator.
prevent unpleasant smells.
If the cabinet is to be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
Possible cause / Remedy
An error has occurred in measuring the
temperature. Call your service representative.
(The cooling system will continue to keep
food products cold, but temperature
adjustment will not be possible.)
Switch off the audible alarm by pressing the
alarm off button.
The audible alarm could have been triggered
by:
The cabinet having been recently switched
on and the temperature still being too high.
See the chapter "Switching on and setting
the temperature".
The door may have been open for so long
that the `door open' alarm was triggered.
Set a lower temperature.
Put food products in the right place inside the
refrigerator. See the chapter "Temperature
inside the refrigerator".
Distribute the food products to allow cold air
to circulate around them.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
Set a warmer temperature.
16