IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
4) Follow all instructions.
5) Do not use this product near water.
7) Do not block ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
9) Do not defeat the safety purpose of the grounding-
type plug. A grounding type plug has two blades and a
third grounding prong.
The third prong is provided for your safety. If the
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
and the point where they exit from the product.
Explanation of Graphical Symbols:
Lightning Bolt: Hazardous Live voltages present when this unit is in operation. Do not touch terminals marked with
this symbol while the unit is connected to live power.
do so will compromise safe operation of this unit
Hazardous Moving Fan Blades: Remove power before servicing and keep away from moving fan blades.
WARNING
WARNING – 100 Volt Speaker terminals marked with the symbol
WARNING – MAINS Powered Products employ Safety Grounding and must be connected to a MAINS socket that is properly
grounded to provide a protective earthing connection.
Disconnect Device - The MAINS plug is used to disconnect MAINS power and must remain readily operable.
CAUTION
connections.
Intended for Installation and Service by Skilled Personnel Only:
CAUTION
to do so.
Skilled Persons must disconnect AC MAINS Power before opening product.
CAUTION - The Installation steps for 'Auxiliary Power' are for use by Skilled Personnel only and must comply with all local
codes.
•
•
Wall Mounting Instructions – Wall mounted products must be securely fastened to drywall or similar surface using a
minimum of 4 wood screws (2 screws for product with only two mounting holes). Alternate fasteners which may be used
inch into wood studs.
manufacturer.
dissipation and securement to the
building structure.
and product combination to avoid injury from tip-over.
unused for long periods of time.
dropped.
are Hazardous Live. External wiring connected to these