ELICA FDS 100 Montaje Y Modo De Empleo página 90

Activation filter saturation indicator
This indicator is normally deactivated.
To activate it, proceed as follows:
- turn on the extractor hob via
- with the extraction motor and cooking zones off, press the
Selection zone (12)
- long press " " (11) until the letters "F" – "G"
appear alternately flashing in the Display (12)
F = carbon/ceramic odour filters
G = grease filter
Carbon/ceramic odour filters

press on the Display (12) when the letter "F"
appears

press "

long press "
activation of the carbon/ceramic odour filter
indicator
Grease filter

press on the Display (12) when the letter "G"
appears

press "

long press "
activation of the grease filter indicator
;
" (13) – flashing light
" (11) again to confirm the
" (13) – fixed light
" (11) again to confirm
This home appliance is designed to be used with a
Window sensor KIT (not supplied by the manufacturer).
By installing the Window sensor KIT (only if used in SUCTION
mode), the air suction unit will stop working whenever the
window in the room in which the KIT is used, is closed.
We recommend that you purchase the FDS - 100
Elektrotechnik Schabus KIT, which is available at the
Elektrotechnik Schabus authorised centres, or directly on the
website www.elektrotechnik-schabus.de.
• The electrical connection of the Window sensor KIT
must be carried out by qualified and specialised technical
staff.
WARNING: place the KIT in an area that cannot be
accessed by the user after installation.
• The manufacturer of this home appliance denies all
liability for any inconvenience, damage, fire caused by
defects and/or malfunctions and/or incorrect installation
of the KIT.
90