Cd Player Operating Instructions - Phase Linear UCD200 Manual Del Usario

UCD200

CD PLAYER OPERATING INSTRUCTIONS

Disc Slot
15
With the label surface facing up, gently insert
the disc into the slot until the soft-loading
mechanism engages and disc play begins.
"LOAd" will appear momentarily. Once loaded,
the ( ) indication will become animated and
the track number and elapsed time will appear
in the display.
NOTE: The unit is designed for play of
standard 5" (12 cm.) compact discs only. Do
not attempt to use 3" (8 cm.) CD singles in
this unit, either with or without an adaptor,
as damage to the player and/or the disc may
occur. Such damage will not be covered by
the warranty on this product.
Track Selector (TUNE/
7
TRACK)
The Track Select functions are used to quickly
access the beginning of a particular track. Each
time the TUNE/TRACK ( ) button (7a) is
pressed, the next higher track number is
selected, as shown on the display panel. Each
time the TUNE/TRACK ( ) button (7b) is
pressed, the next lower track number is
selected, as shown on the display panel.
Cue/Review Functions
7
Press and hold the TUNE/TRACK (
(7a) to advance rapidly forward or the TUNE/
TRACK ( ) button (7b) to advance rapidly
backward. During either function, the elapsed
time of each track will be shown on the display
panel.
Disc Play/Pause Select
16
Press the button (16) to freeze disc play.
"PAUS" will appear on the display. Press
again to resume disc play and the "PAUS"
indication will disappear.
RELEASE
/
UCD200
PWR
EQ
AUDIO
SEL
AMS
11
Track Scan Select (SCN)
17
) button During disc play, press the SCN button (17) to
play the first 10 seconds of each track. ("SCN"
will be displayed with the track number). When
a desired track is reached, press the SCN
button again to cancel the function and play the
selected track. Track Scan mode can also be
canceled by activating the Repeat Play (18) or
Random Play (19) functions.
15
AM / FM / CD RECEIVER
1 2 3 4 5 6
SCN RPT RDM
16 17
7b 7a
EJECT
MON
DISP
TUNE
LOU
TRACK
BAND
MUT
MODE