Publicidad
Idiomas disponibles
Idiomas disponibles
supply unit, charging current at least
500 mA) to charge the device. Do not
leave the lock unattended while it is
charging!
Caution
- A damaged battery could irritate your
airways, skin and eyes. In the event of
contact, immediately rinse the affected
area with water and seek medical
attention. The liquid inside the battery
is flammable!
Attention
- The battery may only be charged if the
lock body housing is not damaged. If
there is visible damage on the lock
body such as cracks or holes, the
battery must not be charged!
- Do not use or store the product in
areas where the temperature could
reach below -20°C or above +40°C. Do
not expose the product to direct
sunlight for long periods of time!
- Never attempt to open the product
and remove the battery. This could
lead to damage (battery outgassing,
short circuit, etc.).
- Do not use a high-pressure cleaner
26
(IP class 44) or aggressive cleaning
agents to clean the lock.
- Check the lock for damage at least once a
year. If there is visible damage on the
lock body such as cracks or holes, the lock
must no longer be used.
1.
First commissioning and charging
the battery
When delivered, the lock is in transport
mode (The bar is only latched in the lock,
not locked).
In order to use the lock, the battery must
first be fully charged.
While charging the device, install the
Smart X app (→ chapter 2, page 30).
27
Publicidad
