Drinkschill Function; Childlock Function; Daily Use - Kuppersbusch IKE1780-0E Manual Del Usuario

6
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
IntensiveCooling function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the IntensiveCooling function to chill the
products more rapidly and to avoid
warming the other food which is already in
the refrigerator.
1. Press the Functions until the
corresponding icon appears.
The IntensiveCooling indicator flashes.
2. Press the OK to confirm.
The IntensiveCooling indicator is shown.
The IntensiveCooling function shuts off
automatically after approximately 6 hours.
To switch off the function before its
automatic end, repeat the procedure.
The function switches off by
selecting a different fridge set
temperature.
Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door open
alarm conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. The
buzzer can also be switched off by
pressing any button.

ChildLock function

Activate the ChildLock function to lock the
buttons from unintentional operation.

DAILY USE

WARNING! Refer to Safety
chapters.
1. Press Functions until the
corresponding icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.

DrinksChill function

The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for a
certain period of time.
1. Press Functions until the
corresponding icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
TheDrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an
audible alarm sounds. Press OK to switch
off the sound and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
It is possible to change the time
at any time during the
countdown and at the end by
pressing the Temperature
colder button and the
Temperature warmer button.