English; Bluetooth Connection - EIVOTOR IPX4 Manual De Instrucciones

ACCESSORIES
1x EIVOTOR Sound Cup Bluetooth Speaker
1x User Manual
1x USB Charging Cable
1x AUX 3.5mm Audio Cable

BLUETOOTH CONNECTION

Turn the speaker on by pressing the power for several seconds, then the blue led
flashes quickly. The speaker now has entered the Bluetooth pairing mode.
CONNECT TO MOBILE PHONES/TABLET
PCs/COMPUTERS
• Go to your phone's Bluetooth settings, scan for new Bluetooth devices.
• Upon device found (EIVOTOR-c1), click the device name and pair with it.
• If your phone ask for pairing code , please enter "0000" and confirm it.
• After successful pairing, the speaker will make a prompt sound and the LED
light turns blue.

English

Note:
Pairing time is varied with different mobile phones. It only needs pairing at the first
time and it will auto connect the devices which have already been paired before
(The speaker only can remember the last 8 paired devices' names).
AUX AUDIO-IN CONNECTOR
The speaker also features 1x AUX audio in port, simply connect the speaker with
your non -Bluetooth mobile phone/MP3 player/PC/laptop with the 3.5mm jack
audio cable. The green light will be on, and then you can play music via wired
connection.
Low power indication
When the battery is low (only 10% of the battery),the green light will flash,and there
will beep beep sound, the user must promptly charge the Bluetooth speaker.
CHARGING
Connect the micro USB charging cable to a computer or USB charger, red LED
indication for charging status. Red LED goes off upon charging finished. (4~5 hours
for charging)
01 02