MABIS Healthcare 04-790-001 Manual De Instrucciones página 17

7. Once the cuff inflates to the appropriate pressure level, the
unit will begin to automatically delfate and the numbers
appearing on the display will decrease.
8. When all the air is deflated, the measurement is complete.
The unit will display your blood pressure (systolic and
diastolic) measurements and pulse rate, Fig. 6 .
9. Record you readings on a chart.
10. Your measurements will be automatically saved in memory.
11. To conserve the batteries, press the POWER button to turn
the power off. Otherwise, the unit will automatically shut off
after approximately 1 minute.
NOTE: This monitor inflates the cuff to approximately 190 mmHg
or 40 mmHg higher than the last systolic pressure stored in
memory. If the system detects that the cuff needs additional
pressure, it will automatically reinflate to approximately 40mmHg
higher than the last pressure level.
15
Fig. 6