Change Batteries
The thermometer uses 2 AAA batteries. When the thermometer indicates that the battery is
low, please refer to the "Battery Installation" section of the manual to replace the battery.
Precautions:
1. When opening the battery door to replace the battery, pay special attention to the
polarity of the battery. Misplacement may cause damage to the product.
2. When not in use for a long time, please remove the battery to prevent damage to the
thermometer due to battery leakage.
3. Do not use when the battery is leaking or moldy.
4. Do not place the battery near a fire source or throw it into a fire to prevent the battery
from exploding.
5. Do not store the battery in a high temperature and high humidity environment.
6. To avoid a short circuit, do not put the battery together with metal objects such as coins
or keys in the same pocket or other container that may short the battery.
Maintenance and Storage
1. The part of the infrared probe is the most precise part of the product. Do not touch or
press with your fingers or other objects, you must be careful to protect it, otherwise it
will affect the accuracy of the measurement value.
2. Cleaning and disinfection methods:
A. Surface cleaning: Please wipe the outer shell of the thermometer with a soft cotton
cloth or cotton swab moistened with 70% -80% alcohol, and do not let liquid enter
the inside of the thermometer.
B. Clean the inner cavity of the sensor probe: Please wipe the inner cavity of the probe
or the top of the sensor with a soft cotton cloth or cotton swab moistened with 70% -
80% alcohol, and use it after the alcohol has completely evaporated.
C. Never use aggressive cleaners, thinners or benzine to clean it, and never immerse
the product in water or other liquids.
3. Carefully protect the surface of the LCD screen.
4. Keep the thermometer in a dry place to avoid dust, pollution and direct sunlight.
5. It is recommended to maintain at least once every six months.
10
EN