Movement RTS Manual De Instrucciones página 53

MAINTENANCE
ALIGNMENT OF THE CRANKCASE
Make sure the featured assembly is parallel. If necessary, loosen
the handrail bolt and adjust it by moving the handrail
horizontally. After adjustment, retighten the screws according
to manual.
Use the table below to know the frequency and type of maintenance to be done on the
equipment:
CHECK
SCREWS
PEDAL
CLEANING
LEVELING
BEARING
BELT
If you find any problems with your equipment contact an Authorized Dealer closest to you
and request a technical visit. If you have any queries or require assistance contact our central
customer service line on 0800-7724080. Never try to change any of the parts or make
modifications to your elliptical. You run the risk of losing your time.
To find the nearest Authorized Dealer, go to http://movement.com.br/assistencia-tecnica
and allow the browser to access your location.
DAILY
Clean the entire
equipment with a damp
cloth, especially clean the
Handles, Pedals, and
chassis.
WEEKLY
Re-tighten the screws
if they are loose
Always level equipment
if swinging.
53
SCREW
MONTHLY
Check that the edal p
is deformed or broken.
Grease self-compensating
bearings once every 12
months. Use GRAXA
MOBILE Mp2®.
For maintenance see page
18 and 20.
Every 6 months check the
belt and change when you
show signs of dryness on
when you are slipping.