ISE SY-5430B Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
STEP 2:
1. Attach the Main Frame (5) to the Cross Support (4), using one M10X60mm Hex
Bolt (36), two M10 Washers (41) and one M10 Nylon Nut (44). one Quick Pin
(20).
2. Attach the Front Upright (7) to the Main Frame (5), using one M10X60mm Hex
Bolt (36), two M10 Washers (41) and one M10 Nylon Nut (44). one M8X55mm
Carriage Bolt (38) and one Plum Blossom Nut (23).
3. Attach the Front Base (6) to the Front Upright (7), using three M8X15mm Hex
Bolts (40) and three M8 Washers (42).
4. Attach the Butterfly Arm (R&L) (9&10) to the Rear Upright (R&L) (2&3), using
two M10X115mm Hex Bolts (35), four M10 Washers (41) and two M10 Nylon
Nuts (44).
9
35
38
41
44
36
41
23
7
42
40
40
42
40
6
2
41
44
4
41
41
44
41
36
41
35
5
10
-3-
20
44
41
3