Ipod Operation; Controlling Playback - Jensen Marine JMS2212 Manual De La Instalación Y Operación

iPod ® OPERATION
®
This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. This unit is made for the following iPod models:
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod with video
• iPhone
• iPhone 3G
• iPhone 3GS
NOTE: Earlier model iPod's are not supported because they do not implement the
required control protocol. Also, the iPod Shuffle is not supported because it does not
utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be
connected to the radio using the Auxiliary Inputs.
Accessing iPod Mode
The unit will automatically switch to iPod mode when
an iPod is plugged into the iPod cable.
To return to the iPod menu from any other source,
press the MODE button (8) on the control panel or
remote control until "iPod" appears on the display.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod
is connected to 30-pin iPod cable, as long as the
vehicle ignition is turned on. You can turn the iPod off
by disconnecting it from the cable or by turning the
ignition off. When the ignition is turned off, the iPod
will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power
cannot be turned on or off from the iPod itself.
NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vehicle ignition is turned on.

Controlling Playback

Pausing Playback
During playback, press the MUTE/>|| button (18) to pause the iPod player. "Pause" will appear
on the LCD. Press MUTE/>|| again to resume playback.
Repeat Play
During playback, press the 1/RPT button (2) to repeat the current song. "Repeat" will appear
on the LCD. Press 1/RPT again to stop repeat playback.
Random Play
During playback, press the 3/RDM button (4) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing. "Shuffle" will
appear on the LCD. Press 3/RDM again to stop random playback.
Selecting Tracks
During playback, press the SEEK |<< / >>| buttons (13, 15) to play the previous or next track in
the current category. Press the SEEK |<< button (13) once to play the song from the start
position or press SEEK |<< twice to play the previous track.
Press and hold the SEEK |<< / >>| button (13, 15) to fast reverse/forward the song.
NOTE: If you press and hold the SEEK |<< / >>| button to change the current song to the
previous/next song, you will exit fast reverse/forward mode.
1
13 Din iPod Ready Cable
4
HEAD UNIT
3
2
8
9
iPod Cable
10
11
Alternate Display Information
Press DISP/SCROLL button (12) to change the display information in the following order:
ARTIST NAME > SONG TITLE > FOLDER NAME.
12
JMS2212
50Wx4
12 13 14 16 17 15
JMS2212
5
6
7
18
19
20
21