Lenco APD-100 Guia Del Usuario página 7

During the on screen display (OSD) settings or operation process, you may make use of the
remote control or the mouse to implement the settings or operation.
To select item:
----- From the remote control:
Mode A: The Highlight mode, press the Up / Down / Left / Right navigation button from the
remote control to highlight item.
Mode B: The Mouse mode, press the MOUSE button from the remote control once and the
mouse cursor displays on screen. In this mouse mode, press the Up / Down / Left / Right
button which move the cursor to the desired position.
Each press of the MOUSE button which toggle between Mode A and Mode B.
----- Move the mouse cursor to the item position by the mouse.
To confirm selection:
----- Press the ENTER button from the remote control.
----- Click the LEFT button of the mouse.
To go back to upper level page, or previous screen:
----- Press the RETURN
----- Click the RIGHT button of the mouse.
To call out the on screen menu bar:
----- Press the MENU button from the remote control.
----- Press the middle button from the mouse.
Directly jump to Home screen:
----- Press the HOME
MAP Base unit and Wi-Fi Router pairing
The MAP system needs a Wi-Fi router (wireless network) working together and the router
connected to Internet which is preferred.
The model comes with a Wi-Fi router, where the MAP Base unit is preset the connection with this
router. Following are the router's preset parameters:
Router name:
Password:
If you would like to change the password of the router in future, please refer to the router user guide.
In the case other Wi-Fi router joints the network, install the Wi-Fi router and remember its log-in
name and password. For detail installation of the router, please refer to the user's manual of the
router purchased.
For the MAP Base unit pair with the accompany Wi-Fi Router (or pair with other router)
With the system set up as illustrated in diagram A above, you can start to implement some initial settings.
(1) Turn on the router.
(2) Connect a USB mouse to the USB port located at the side of the MAP Base unit.
APD-100 5L IB.pdf APD-100 5L IB.pdf 7 7
Navigation Button and Mouse
button from the remote control.
HOME Screen
button from the remote control.
Settings
MAP
A2345678
7
2012-5-31 2012-5-31 14:46:15 14:46:15