Playing A Record - auna NR-620 Manual Del Usuario

EN
36

PLAYING A RECORD

Before use: Remove the guard on the pickup. Detach the tone arm from
the holder and secure it again after use.
• Select „Phono" by means of the function selector switch (3).
• Select the speed according to the recording.
• Place the record on the turntable (use the spindle adapter if necessary).
• Lift the tone arm from the holder and move it slowly towards the edge
of the record. The record will begin to rotate.
• Place the tone arm on the desired position of the record.
• Adjust the speakers to the appropriate level.
• At the end of the record, the turntable stops automatically. Lift the tone
arm and place it back on the holder.
• To stop playback manually, raise the tone arm and place it back on the
holder.
Note: If the record has auto-stop areas, playback stops at them. If you
want to listen to the record continuously, set the Auto Stop switch (30) to
„Off". After playback, lift the tone arm and place it back on the holder.
Converting CD / record or cassette to MP3
The unit can convert CD, record and cassette to MP3 files and save them to
a USB memory media or SD/MMC memory card.
Convert CD
(1) Recording from one track
• Connect a USB memory device to which you want to record (there must
be enough free space).
• Play the CD you want to record normally.
• Press „Record" (9) during playback of the desired track.
• & appear and flash on the LCD display (2) during recording.
• After recording the track, playback will stop automatically.