OBJ_BUCH-0000000148-005.book Page 30 Monday, August 5, 2019 10:02 AM
en
30
must be disposed of in impermeable
plastic bags conforming with the
valid regulations for the disposal of
such waste.
For maintenance on behalf of the
user, the vacuum cleaner must be
disassembled, cleaned and main-
tained as far as feasible, without caus-
ing a risk for the maintenance
personnel or other persons. Prior to
disassembly, the vacuum cleaner
should be cleaned in order to pre-
vent any risks.
The room/enclosure in which the
vacuum cleaner is disassembled
should be well ventilated. Wear per-
sonal protective equipment during
Fault Finding.
Malfunction
Vacuum cleaner can-
not be switched on.
Reduced vacuuming
capacity.
Dust escapes during
vacuuming.
No suction capacity
when wet vacuuming.
Automatic shut-off
does not actuate.
maintenance. After the maintenance,
the maintenance area should be
cleaned.
Products that have come into contact
with asbestos may not be sent in for
repair. Dispose of products contam-
inated with asbestos according to the
applicable country-specific regula-
tions for such disposal.
The current spare parts list for this
vacuum cleaner can be viewed on
the Internet at www.fein.com.
If required, you can change the
following parts yourself:
Fleece filter bag, flat-fold filter, filter
cartridge, hose, tool sleeve
Cause
Circuit breaker of
power connection has
tripped.
Vacuum cleaner in
remote control opera-
tion.
Vacuum cleaner not fit-
ted correctly.
Vacuum system clogged. Clean vacuum hose and
Fleece filter bag full.
Flat-fold filter full.
Incorrect installation
position of flat-fold filter
Container full.
Sensors soiled/dirty.
Troubleshooting
Ensure power supply.
Set operating-mode
selector switch to "I".
Mount vacuum cleaner
lid properly and com-
pletely close both fasten-
ers.
extension tubes.
Replace fleece filter bag.
Replace flat-fold filter.
Correct installation posi-
tion of flat-fold filter.
Empty container.
Clean sensors and space
in between with a brush.