Technical Data; Angle Grinder; Noise/Vibration Information - Bosch GWX 18V-7 Professional Manual Original

20 | English
a)
(11) X-LOCK cutting disc
(12) Handle (insulated gripping surface)
(13) X-LOCK holder
a)
(14) Hand guard
(15) X-LOCK backing pad for fibre discs
a)
(16) X-LOCK fibre disc
(17) X-LOCK clip for fibre discs

Technical data

Angle grinder

Article number
Rated voltage
A)
Rated speed
Max. grinding disc diameter
Restart protection
Run-out brake
Soft start
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary
handle
– with standard auxiliary handle
Recommended ambient temperat-
ure during charging
Permitted ambient temperature dur-
C)
ing operation and during storage
Compatible rechargeable batteries
Recommended rechargeable batter-
ies
Recommended chargers
A) Rated speed in accordance with EN 60745-2-3
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 87
dB(A); sound power level 98 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 7.5 m/s , K = 1.5 m/s ,
h
Disc sanding:
2 2
a < 2.5 m/s , K = 1.5 m/s .
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
1 609 92A 6KH | (15.07.2021)
a)
a)
GWX 18V-7
3 601 JH9 101
V=
-1
min
mm
B)
kg 2.4–3.1
kg 2.2–3.0
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V... ≤ 8.0Ah
GAL 18...
GAX 18...
GAL 36...
(18) X-LOCK cup brush/disc brush
(19) X-LOCK diamond annular cutter
(20) Extraction guard for cutting with cutting guides
(21) X-LOCK diamond cutting disc
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWX 18V-7
3 601 JH9 102
18 18
11,000 11,000
115 125
●
–
●
2.4–3.2
2.3–3.0
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V... ≤ 8.0Ah
GAL 18...
GAX 18...
GAL 36...
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
a)
a)
a)
a)
GWX 18V-7
3 601 JH9 1B0
18
11,000
125
● ●
– –
● ●
2.4–3.2
2.3–3.0
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V... ≤ 8.0Ah
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools