Publicidad
Idiomas disponibles
Idiomas disponibles
USER MANUAL
GogiPet® Orate OHC-385
Thank you very much for the purchase of GogiPet® Orate professional hair clipper, OHC-385.
Please read all the user instructions carefully before using.
▲ Warning
－ Before using, please check the clipper to make sure it is free from any visible damages.
－ Do not charge the clipper in an environment where temperature is over 40℃ or under 0℃.
－ This clipper uses a chargeable lithium-ion battery. It must be disposed of in accordance with
the local regulations, instead of together with other household refuse.
－ Do not disassemble the clipper. As it has sharp components, incorrect assembly may result in
injury.
－ The plug adapter has a transformer inside. To avoid electric shock or fire, Do NOT change the
plug yourself.
－ This clipper can be used by children from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of it in a safe way and made aware of associated risks.
DO NOT allow children to play with the appliance.
－ Use the adapter and other accessories supplied only by GogiPet ® Orate.
▼ Cleaning
－ Only the cutting head (the blade set) can be washed by water. DO NOT immerse the clipper in
water or wash under tap water.
－ DO NOT disassemble this clipper. Incorrect assembly may result in electric shock or fire.
－
DO NOT use compressed air, steel wool, abrasive detergent or corrosive liquid(such as
petroleum or acetone) to clean this clipper.
▼ Storage
－ Always store this clipper in a moisture-free area.
－ DO NOT expose this clipper to direct and prolonged sunlight or other sources of heat.
－ This clipper and lubricant should be stored in a location inaccessible to children.
▼ Charging
－ Clipper must be turned off.
－ Insert the terminal of adapter cord into the bottom of the clipper and plug the adapter unit into a
power outlet.
－ Before first use or if the clipper has not been used for a long time, the battery needs to be fully
charged.
－ After charging is finished, first remove the adapter from the power outlet and then the adapter
cord from the clipper.
－ If the battery power is too low in the middle of a cutting job, the adapter cord can be attached to
continue use in corded operation.
EN
Publicidad
