Steren BAF-1595 Manual De Instrucciones página 11

SPEAKER BOX INSTALLATION
Make all initial connections with the power switches OFF on all
equipments. Make sure volume level are all the way down, later you can
adjust it.
1.- Connect the polarized cable to electric current, then plug to the
speaker.
2.- Connect a microphone into MIC 1 or MIC 2 input through a 6,3mm or
Canon connector.
3.- Use Line IN connectors to plug a CD, tape, MP3 or DVD player,
among others.
4.- Turn the devices on, a green LED will light on, indicating the
equipment is in use.
5.- Set the volume level on each device. Adjust the volume control on
the speaker.
6.- Set Treble, and Bass frequencies in accord to your necessities.
Do not place the microphone near to the speaker, may cause echo Do not place the microphone near to the speaker, may cause echo
and damages on the equipment. and damages on the equipment.
You can use the 6,3mm and Canon LINE OUT connectors to plug You can use the 6,3mm and Canon LINE OUT connectors to plug
other amplifi er or another speaker. other amplifi er or another speaker.
ENGLISH-11