Matco Tools MT2993 Guia De Inicio Rapido página 2

1.) LUBRICATION:
Before connection of the hose, apply 4 to 5 drops of a good
quality air tool oil at the air inlet. After 3 to 4 hours of
operation, oiling may be necessary again.
2.) TIGHTNESS OF PARTS:
Regularly check whether all connection parts are
fastened securely. Follow this procedure daily
before beginning work.
3.) STORAGE:
Avoid storing the tool in a location subject to high
humidity. If the tool is left unused, the residual moisture
inside the tool can cause rust. Before storing and after
operation, oil the tool at the air inlet with a good quality
air tool oil and run it for a short period.
4.) DISPOSAL:
Follow national legislation of waste disposal.
5.) ORDERING SERVICE PARTS:
For further operational and handling information or
for replacement of parts and components, contact
your Matco Tools Distributor.
*When ordering parts and components, give each
part number, name and quantities.
QUICK-LOCK 90°
RIGHT ANGLE DIE GRINDER
1) The tool shall not be used in potentially explosive atmospheres.
2) Disconnect the air hose before changing or adjusting any
inserted tools.
3) Before using tool, please confirm all couplings and plugs are
fixed securely. An air hose that is under pressure may lash out
when disconnected and could lead to serious injuries.
4) Prevent loose clothes, long hair or any other personal
accessories from coming close to moving parts to reduce the
risk of being caught, trapped or drawn into the mixer.
5) Excessive high air pressure that exceeds the maximum
pressure may cause injuries to user.
6) Exposure to strong vibration for extended time may cause harm
to operator.
7) Make sure of the rotation direction before starting the tool to
reduce hazardous situations due to unexpected rotation
direction.
8) Slip/Trip/Fall is a major reason of serious injury or death.
Beware of excess hose left on the walking or work surface.
9) Wearing eye/face protection could reduce the danger to person
from high speed splinters being emitted from the tool or work
surface.
10) Wearing correct breathing protection will help avoid inhaling
11) High sound levels can cause permanent hearing loss.
12) Due to the material being processed, there may be a risk of
13) There is a risk of being cut due to high speed rotation.
14) This power tool is not insulated. If contact is made with an
15) Dust and paint particles created from the mixing process may
Page 2
WARNING
dust or debris from work process that can be harmful to your
health.
Use hearing protection while operating tool.
explosion or fire. Be aware of work surface dangers prior of
beginning work.
Do not touch high speed rotating disc.
electric current, injury may occur.
expose the user to dust and/or microscopic particles that may
contain chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
MT2993
1506097-14MA