Checking Operation; Model And Serial Number Location; Before You Call For Service - Electrolux E30WD75DSS Instrucciones De Instalación

ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS

5. Checking Operation

If your model is equipped with an Electronic Oven
Control. Each of the functions has been factory checked
before shipping. However, it is suggested that you verify
the operation of the electronic oven controls once more.
Refer to the Use & Care Guide . Follow the instructions
for the Clock, Timer, Preheat, Bake, Broil Convection
and Clean functions.
Bake–After setting the oven to 350°F/177°C for baking,
the lower element in the oven should become red.
Broil–When the oven is set to BROIL, the upper element
in the oven should become red.
Clean–When the oven is set for a self-cleaning cycle, the
lower element will become red.
Convection–When the oven is set for a convection,
Convection element located at rear of the oven will turn
on.
IMPORTANT NOTE: A fan inside the oven will turn on as
soon as the oven is operate.

Model and Serial Number Location

The serial plate is located inside the oven on the side
trim.
When ordering parts for or making inquires about your
oven, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate
on your oven.

Before You Call for Service

Read the Avoid Service Checklist and operating
instructions in your Use & Care Guide. It may save you
time and expense. The list includes common occurrences
that are not the result of defective workmanship or
materials in this appliance.
Refer to the warranty in your Use & Care Guide for our
toll-free service number and address. Please call or write
if you have inquiries about your product and/or need to
order parts.
6