English
Hair straightener
Slimlook Infrared
Dear customer,
Many thanks for choosing to purchase
a TAURUS brand product.
Thanks to its technology, design and
operation and the fact that it exceeds
the strictest quality standards, a fully
satisfactory use and long product life
can be assured.
Description
A Straightening Plates
B Indicador IST
C On/off button
D Heat setting buttons +/-
E LCD screen
F Lock switch
G Thermal resistant bag
H Straightening comb accessory
Safety advice and warnings
- Read these instructions carefully
before switching on the appliance
and keep them for future referen-
ce. Failure to follow and observe
these instructions could lead to an
accident.
Electrical safety:
- Do not use the appliance if the
cable or plug is damaged.
- Ensure that the voltage indicated
on the rating label matches the
mains voltage before plugging in the
appliance.
- Connect the appliance to a socket
Manual Slimlook Infrared.indb 12
that can supply a minimum of 10
amperes.
- The appliance's plug must fit
into the mains socket properly. Do
not alter the plug. Do not use plug
adaptors.
- If any of the appliance casings
breaks, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
- Do not use the appliance if it has
fallen on the floor, if there are visible
signs of damage or if it has a leak.
- CAUTION: Maintain the appliance
dry.
- CAUTION: Do not use the appliance
near water.
- Do not use the appliance near
bathtubs, showers or swimming pools.
- Do not use the appliance with damp
hands or feet, or when barefooted.
- Do not force the power cord. Never
use the power cord to lift up, carry or
unplug the appliance.
- Do not wrap the power cord around
the appliance.
- Do not clip or crease the power
cord.
- Do not allow the power cord to come
into contact with the appliance's hot
surfaces.
- Check the state of the power cord.
Damaged or tangled cables increase
the risk of electric shock.
- As an additional protection to the
electrical supply for the appliance,
it is advisable to have a differential
current device with a maximum sensi-
tivity of 30 mA. Ask for advice from a
competent installer.
- Do not touch the plug with wet
hands.
03/09/12 18:26